Mindray 5 Part Diff Analyzers Hematology Reagent For Clinical Experiments

• Remove all the reagent aspiration tubes from the currently used reagent boxes or bottles.
• Wipe the tube’s surface with a lent free tissue, and then rinse with distilled water. Put the tubes into the LABNOVATION reagent boxes or bottles.
• Run at least 50 backgrounds. Check for the acceptable values. At first high background counts can be seen, that should lower to normal after a few runs.
• Run all three levels of a dedicated commercial control. Check for the acceptable values.
• Recalibrate the unit if necessary.

• Re-calibration is recommended when changing the origin of the reagents.
• It is not recommended using different brands of solutions together on one unit of analyzer.
• Do not ingest. Avoid contact with skin and eyes.
• Skin contact: Flush with plenty of water.
• Eyes contact: Flush with plenty of water. Obtain immediate medical attention.
• This kit is for professionals and in vitro diagnostic use only.

Specification

KIT COMPOSITION

• One source for all brands of analyzer
• Reagents for both 3-parts and 5-parts
• Ready-to-use final products and bulk OEM reagents
• ISQ13485:2003 and ISO9001:2008 certified
• CE marked, FDA cleared
• Well-established brand used by thousands of lab in 95 countries
• High quality, high performance and high fidelity of correlations with original brand.

Storage

• Store the product at 5-35℃ in a dust free place with good ventilation. Temperature outside the range may damage the product.

  The open vial life of the product is 30 days. Unused reagents should be discarded after 30 days. Do not mix residual with a new carton.